Release R03.03.00-RVN 4098H

The HT/JT1000/VISAR Conventional RSS has been up-issued to add additional
features and to correct some problems in the previous version.

New features supported in this release:

 1.  The DTMF keypad on HT1000 radios can now be enabled and disabled by
 the RSS.  Once enabled, the user has access to all DTMF related fields in
 the RSS.  This feature has no effect on radios without a keypad.
 
 2.  The Hot Keypad feature on an HT1000 radio can now be enabled and
 disabled by the RSS.  This feature has no effect on radios without a keypad.
 
 3.  The user can now specify an alternate synthesizer reference 
 frequency, and specify which channels will use it.  This feature can be
 used to eliminate certain crosstalk problems.  It is only available on
 HT1000 and Visar radios with firmware version 4.04 or later.
 
The RSS problems which have been resolved in this release are:
 
 1.  All dates are now displayed with a four digit year.
 
 2.  The Auto Reset Timer range was incorrectly stated as 0 to 34 seconds.
 The RSS would accept the maximum value of 34 seconds, but would convert
 it to 0 on screen exit.  The range is now 0 to 33 seconds, which is
 within the radio's capability.
 
 3.  The help text for the DTMF Hangtime field was updated to specify that
 this field has no effect on JT1000 radios.

 4.  The Side Button and OptionúMate Configuration help screens were
 updated.  All references to HT1000 "B" models were changed to include 
 HT1000 "B" or later models.  
  
 5.  In Visar radios, if the flip/lock feature was programmed for flip while
 the channel selector was locked, the radio would stay locked with no way
 to unlock it.  Now, whenever the flip/lock feature is programmed for flip,
 the channel selector is automatically unlocked.
 
 6.  A warning message is now generated if the user attempts to select 
 Mandown Pre-Alert while Silent Emergency is enabled.  These two features
 are mutually exclusive.